DJ headphones
AIAIAI TMA-2 DJ Wireless: Setup and Buying Guide
A wireless DJ headphone needs to do more than connect to your phone. It must let you hear the next track in time with the music playing through the sound system. The AIAIAI TMA-2 DJ Wireless tackles that job with a dedicated W+ Link connection and an X03 transmitter.
This guide updates our original launch article with current specifications and practical setup advice. It is a product guide based on manufacturer information, rather than a new hands-on test.
W+ Link, Bluetooth or a cable: which should you use?
Use W+ Link for wireless DJ monitoring. AIAIAI specifies latency below 10 ms with the X03 transmitter. Bluetooth is the separate listening option for your phone; it should not be confused with the low-latency connection used for cueing.
A cable is also useful. Keep it in your bag as a fallback, and test your complete setup before a performance. Wireless convenience is helpful only when the signal routing, pairing and battery checks are part of your routine.
Current specifications at a glance
- Headphone weight: 217 g.
- W+ Link playback: 20 hours in the current specification table.
- Bluetooth playback: 40 hours; Bluetooth 5.3.
- X03 transmitter playback: 40 hours.
- Charging time: approximately 2 hours.
- Drivers: 40 mm bio-cellulose.
- Earpads: E02 on-ear memory foam cushions.
These are manufacturer figures, not Silent Noise battery-test results. Actual runtime depends on use. The 25-hour figure and early-2025 launch wording in our original article have been replaced with the current product information.
How to connect to a DJ controller or mixer
- Charge both parts. Check the headphone speaker units and X03 transmitter before your session.
- Choose the right audio feed. For headphone cueing, connect the controller or mixer’s headphone/monitor output to the X03 mini-jack input using the appropriate cable or adapter. A master output alone will not give you the cue mix you expect.
- Pair the headphones and transmitter. Follow AIAIAI’s current setup instructions and confirm W+ Link mode. A white S11 LED indicates W+ Link; blue indicates Bluetooth.
- Start with a low level. Test the channel cue buttons and cue/master blend. Check that you can preview an incoming track while the master mix keeps playing.
- Rehearse your normal movements. Test the connection where you intend to use it, then keep the wired option within reach.
The X03 also accepts USB-C audio. Use the manufacturer’s instructions for your device and routing rather than assuming any USB socket on a mixer supplies headphone audio.
What comes in the standard package?
AIAIAI’s setup guide lists the H02 headband, two S11 speaker units, X03 transmitter, E02 earpads, C05 cable with a 6.3 mm adapter, and A01 protective pouch. Check the exact local listing before ordering, especially when comparing a complete headphone set with a wireless upgrade kit.
Why the modular design matters
TMA-2 components can be replaced or changed individually. That gives an existing owner another question to ask before buying: do you need a complete headphone, or an upgrade for parts you already own?
The S11 + X03 wireless upgrade kit is a different purchase from the complete DJ Wireless package. Check your existing headband and earpads with Silent Noise before choosing. The ear cushions affect fit and isolation, so a familiar model name does not guarantee the same wearing experience.
Is it the right headphone for you?
Put it on your shortlist if you value a light on-ear design, replaceable components and wireless cueing through a dedicated transmitter. Try the fit if you can: comfort depends on your ears, head shape and how you wear headphones during a set.
If you mainly listen to music from a phone, decide whether you need the DJ transmitter workflow at all. If you are comparing wireless DJ options, read our TMA-2 DJ Wireless vs AlphaTheta HDJ-F10 comparison for the differences in weight, connection system and battery figures.
Shop AIAIAI in the Philippines
See the AIAIAI TMA-2 DJ Wireless product page for current Philippine pricing, availability and package details, or explore the AIAIAI range at Silent Noise.
Set it up, check your cue mix, and Keep Playing.
Useful extras for your TMA-2
The complete DJ Wireless set already includes the X03 transmitter, cable and protective pouch. The following are optional additions or replacements.
- For a more structured travel case: the AIAIAI A04 hardcase is designed for TMA-2 headphones. Choose it if you want a hardcase for carrying your headphones between sessions.
- When the original cushions wear out: AIAIAI E02 replacement earpads restore the on-ear cushion configuration. A new full headphone set already comes with cushions.
- Already own a wired TMA-2? The S11 + X03 wireless upgrade kit lets you reuse a compatible headband and earpads. It contains speaker units and a transmitter, not a complete assembled headphone. You do not need this kit when buying the full DJ Wireless set.
Check the linked listings for current availability and confirm your existing components before ordering.